Final Year Project2(Hardware) Week7

Title: Find suitable car model

Objectives:

• To find a car model that are suitable and can be used into my final year project
• The car model must be at least width=6 inch,length =16inch and high=6 inch
• the car model must can be fit in the main controller circuit and relay circuit

Procedure:

• Go to the supermarket and find the car model that cannot function well with the cheaper price because the purpose of finding this car model are only wants to get their body and chassis not the circuit for the controlling the car.

Microcontroller circuit fit to the model

car model satisfy the specification

• After the car model that satisfy the objectives, next the chassis needs to do some modification to create the 4 door system that can react as real door simulation for a car.

step1

step2

step3

step4

• For the Step1, Draft the pattern for real door car to make it possible to open
• Step2, after draft by using marker, the image of the 4 door are clear already. So, cut the door that followed the line that has been created before this and separated it from plastic chassis.
• The plastic chassis are thin and not strong enough to hold the pressure and load from human hand. So, it must be redesign by using the cardboard paper that are more thick and strong enough to hold the pressure as shown at step3.
• Step4 are shown about the design that are created at cardboard paper that can opened the car doors.
• after Step4, the door that had been cut before this needs to put a gum and to make sure the door are hard enough to hold the human hand pressure.

Result and Analysis:

• The car model are satisfy the objectives of this week because the 4 door can be opened and the car model can open and close the door properly by some modification.
• The importance to find the right car model is to make sure that the car are exactly could be same as real car viewer.

Conclusion:

• The objectives for finding the car model are acheive and the door can be well opened, same as the virtual car system that are simply can tell people about this project purpose due to the real situation while the thief wants to opened the car doors.